Printing your own personal images, pictures, designs or text onto ceramics is a lot easier than you might believe. This short article will demonstrate two popular techniques that can be used in the home to transfer images onto ceramic surfaces like plates, mugs and tiles as an illustration.
Method 1 – Using waterslide papers to a3 uv printer onto ceramics
This is one of the easiest craft projects you are going to ever do and professional looking results could be expected in your first attempt.
1 – Purchase some waterslide decal paper. Should your ceramic surface is white or possibly a light colour, choose the clear waterslide decal paper. Alternatively, should your ceramic surface is dark in colour, opt for the white waterslide decal paper. Decal papers are for sale to both inkjet and laser printers and work differently. I shall explain the differences later in the following paragraphs. A pack of 5 A4 sheets is enough to print pictures onto around 20 ceramic mugs or possibly 10 plates.
2- Open the picture or type your text into Microsoft word or maybe your photo editing software like Photoshop. You need to size your work as outlined by your ceramic surface, so for ?nhor1%, you might make use of the top left quarter of your page and print an evaluation on a regular piece of paper and possibly even cut that out and put into the mug to ensure that you are pleased together with the size.
3 – Load your decal paper to your printer which means that your print lands into the papers shiny side. This is actually the coated side from the paper that may be effectively a very thin film that slides off the papers backing when water is used later within the production process.
4 – Take your printed picture or text and either cut it out now or when you have filled your A4 sheet of decal paper with pictures, let it sit as one piece since it can make the next stage easier.
5 – In case you have purchased inkjet waterslide decal paper, you will also require some clear varnish for the following stage since you will now start to apply the varnish to your image. Ensure you have either waited a minimum of a half-hour or have used a hair dryer on your print to make sure that it provides dried.
6 – Apply 2 to 3 quick, even sprays of varnish over your image, separated by around 10 minutes. Will not use too much as this can harden your decal, making it awkward to utilize into a curved surface. Apply to little though so you risk leaving a small area or two for water to engage your print, resulting in an ink smudge. That said though, tend not to over concern yourself with applying the varnish as latte coffee printer by using this technique is very forgiving and pursuing the instructions can provide achievement.
7 – Reduce your image out close to the edges and put into water. You can use your fingers to keep the paper under the water and also to make it flat as it will automatically usually tend to curl up when it hits the water. Again, don’t worry when it can this as you can easily flatten it again whilst under the water with your fingers.
8 – After around half a minute the paper backing will suddenly become loose and easy to slip off. Do not slide it off though yet. Remove the ceramic decal from your water and slide off 1 centimetre. Apply the 1 cm of film you have slide off directly on your ceramic surface, then slide all of those other paper backing away, leaving you with your printed film directly on the ceramic surface. Gently feather away water under the decal with the fingers taking care at this time to not tear it.
9 – The decal starts to harden quickly and once dry you can place it in a oven for a further ten minutes at 110c.
10 – Applying another coat of clear varnish will add extra protection in your project. Waterslide decal papers produce an excellent finish for decorative purposes. Hand wash any ceramic 15dexbpky that you just complete and prevent placing finished work like ceramic cups and plates into dishwashers.
The real difference between inkjet and laser waterslide decal paper
The 2 decal papers are similar and provide exactly the same desired results, the real difference being that clear acrylic spray / clear varnish is not needed when you use laser waterslide decal paper. You effectively skip steps 5 and 6 above. Once you have completed your ceramic project using laser waterslide paper, you are able to of course apply some clear varnish for further protection and sturdiness.
Method 2 – Using ceramic paint to use your own personal designs to ceramics
In case you have some artistic flair or only want to give ceramic painting a go, start by acquiring several basics like some suitable ceramic paint and brushes. Pebeo and Liquitex are the two leading brands for A4 UV Printer and brush sizes 1 and 2 round and ¼” flat could be ideal for painting small ceramic tiles for instance.
Begin with washing your ceramic surface with soapy water, dry and begin by drawing your design on the ceramic in pencil. Unwanted pencil marks can be taken off using water or painted over. Choose your colours and squeeze into your palette. Ceramic printing paint goes quite a distance but can also dry quickly so bear this under consideration when starting and have an idea of your own colour scheme before you begin.
To mix a colour, apply the lighter colour to the palette first so if you wanted a grey colour, you would probably apply some white in your palette before adding a tiny amount of dark colour until you make it to the ideal grey. Keep all your mixed colours if you happen to require them later for finishing touches.
Start out with your lighter colours first and apply one colour at the same time. Put a tiny amount of paint to your palette but require a modest amount in your round brush and paint evenly across the ceramics natural flow. Ceramic paint dries quickly allowing you to add another coat quite quickly if required.
Use a liner brush (thin brush) for detailed edges. Lighter colours can be painted over whenever you go to painting using the darker colours so don’t panic should you go over the sides.